Hand Wash & Cleaning

Two-tap hand wash station that recovers gold dust from workers' hands before it leaves the department. The SS basin drains into a PP settling tank with pump and 5–10 micron cartridge filtration on a closed water loop, with a level switch for automatic operation and wheels for easy mobility. Features: • PP body with SS wash basin & swiveling tap • PP settling tank with pump & cartridge filter • Level switch for auto operation • Two cartridge filters of 5 to 10 micron • Machines available in desired sizes as per your specification • Machine is on wheels for easy mobility Specifications: • Dimensions: 3' x 20" x 3' (L x B x H) approx. • Input: 220V AC / 50Hz • Pump motor: 0.5 HP Manufactured by Professional Engineering Works (ISO 9001, CE marked).

Three-tap hand wash station with heavy-duty filtration for gold dust recovery, available with either a dish-cartridge filtration plant or jumbo filters. The 48-inch SS wash basin and four-compartment PP settling tank recover fine precious metal from wash water in busy jewellery factories. Features: • PP settling tank with SS wash basin (3 taps) • PP tank size 48" x 20" x 36", PP 8mm thick • SS wash basin 48" x 20" x 8" x 10", SS 304/18g • PP partition 3 nos, 4 compartments, SS net 3 nos • MS angle frame with wheels • Option 1 — Dish cartridge filtration plant (14" dia) with PP frame: jumbo cartridge 2" dia x 20" long x 6, controller with magnetic float sensor & wiring, 1 hp pump, CPVC plumbing, 220V AC 1 phase • Option 2 — Jumbo filter 4" dia x 20" long x 6 (5/10 micron): controller with magnetic float sensor & wiring, 1 hp pump, CPVC plumbing, MS angle frame, 220V AC 1 phase Specifications: • PP tank: 48" x 20" x 36" (8mm thick) • SS wash basin: 48" x 20" x 8" x 10" (SS 304/18g) • Pump: 1 HP • Power: 220V AC, 1 phase Manufactured by Professional Engineering Works (ISO 9001, CE marked).

Ultrasonic hand wash machine with auto sensor for jewellery setting, model making and filing departments. Operators clean up in luke-warm water in the elbow-deep SS tank before leaving the department, recovering gold dust and improving accountability — the machine switches on automatically as they approach. Features: • Very useful for setting, model making & filing departments • Ultrasonic hand wash for cleaning hands before leaving the department, for accountability • Auto sensor — machine switches on automatically as the operator comes before it • Luke-warm water (35°C) for better cleaning • Elbow-deep SS tank for efficient cleaning • Ball valve provided for removing water from the tank • Fully SS body • Wiremesh jali provided at the bottom of the cleaning machine Specifications: • Dimensions: 16" x 14" x 11" (L x B x H) • Capacity: 25 litres • Power: 220 Volts, 50 Hz • Heaters: 1.5 kW thermostats • Frequency of operation: 25 KHz Manufactured by Professional Engineering Works (ISO 9001, CE marked).

High-pressure water jet cleaning machine with SS 316 body for investment removal and cleaning after jewellery casting. Two pumps deliver a zero-degree breaking jet and a 25-degree cleaning jet, while the PP settling tank recovers powder and precious metal from the runoff. Features: • SS body 316 • Tube light provided for better illumination • PP settling tank for collecting the powder, with SS net • PVC gloves provided in the hood • Perforated PP plate in the hood to reduce splashing of jet • Two pumps provided (for breaking) for zero degree • 25 degree hit (for cleaning) • Machine on MS wheels for easy mobility • Two nozzles provided Specifications: • Electric supply: 440 AC, 50 Hz, 3 phase • Hood size: 24" x 24" x 24" (L x B x H) • Heavy angle frame: 1½" x ½" • PP settling tank: 18" x 18" x 18" with 0.3 net, on castor wheels • High-pressure pump: HD 800E, water output 750 litres • Operating pressure: 110 Bar / 1600 PSI • Motor rating: 4 kW • High-pressure hose: 10 mtrs • Spray length: 50 mm; nozzles 0 degree and 25 degree Manufactured by Professional Engineering Works (ISO 9001, CE marked).